AIMS eWaves Super

AIMS eWaves Super automates the 10-Second Elliott Wave counting method on TradingView. Built on momentum rather than subjective price swings, it reads Awesome Oscillator (AO) histogram peaks to deliver objective 0–5 wave counts, Wave-4 pullback quality grading, and automated Wave-5 Fibonacci target projections (TZ1/TZ2).

Key Features:

Momentum-Based Wave Counting — Evaluates Awesome Oscillator (AO) histogram peaks rather than subjective chart swings
Automated 0–5 Wave Detection — Accurately identifies Point 0 origin, Wave 1, Wave 2, Wave 3 peak, Wave 4 retrace, and Wave 5 divergence
Enforced Elliott Wave Cardinal Rules — Strictly validates Wave 2, Wave 3 (never shortest), and Wave 4 overlap before printing labels

$497 USD / one-time

Get Instant Access

AIMS eWaves Super is the definitive automated Elliott Wave analysis indicator for TradingView. Engineered strictly according to the methodology detailed in the bestselling book "How to Count Elliott Waves within 10 Seconds or Less", it transforms subjective wave counting into an objective, repeatable, and effortless trading edge.

AIMS eWaves Super Elliott Waves Indicator on TradingView — AIMS eWaves Super on TradingView: Objective 0–5 momentum wave counts, Wave-4 quality grading, and automated Wave-5 target projections.

Count the Momentum, Not the Price

Traditional Elliott Wave analysis on raw price charts is famously subjective: "Ten Elliotticians in a room will give you twenty different wave counts." Traders get trapped counting every wick, micro-swing, and erratic spike.

The iTradeAIMS 10-Second method solves this problem permanently by counting the momentum peaks of the Awesome Oscillator (AIMS Wave) histogram rather than price bars. Momentum obeys mathematical laws of physics: when institutional money enters a trend, the momentum signature is unmistakable. Understanding the AO histogram is understanding true market structure — and AIMS eWaves Super executes this analysis automatically on every single bar.

AIMS Wave Elliott Wave Count Labels and Market Context — Automated Elliott Wave labels with clear point origin, impulse peaks, and structural context across multi-timeframe charts.

How the Automated Engine Reads Market Structure

The indicator follows the exact systematic sequence taught in the iTradeAIMS curriculum:

Point 0 Origin: Placed precisely at the swing zero-line cross that initiates the impulse cycle.
Wave 3 Peak: Automatically identified as the dominant, tallest AO histogram peak representing maximum institutional momentum.
Wave 4 Retrace: Validated when the histogram pulls back toward the zero line, confirming a healthy consolidation rather than a trend reversal.
Wave 5 Target Projections: Confirmed by price-versus-AO divergence, dynamically projecting target zones TZ1 (62%) and TZ2 (100%) of the impulse structure — where Wave 5 completes with documented ~80% accuracy.
Unidirectional Clarity: Suppresses the non-dominant direction so you are never confused by conflicting bull and bear labels on an active trend.

Wave 5 Prediction and Fibonacci Target Zones TZ1 and TZ2 — Target Zones TZ1 (62%) and TZ2 (100%) plotted automatically with dynamic risk levels and conservative/aggressive invalidation lines.

Strict Enforcement of Elliott Wave Cardinal Rules

Unlike basic scripts that draw arbitrary numbers anywhere on a chart, AIMS eWaves Super contains a built-in mathematical rule governor. A count is immediately suppressed if any inviolable rule is broken:

Rule 1: Wave 2 can never retrace beyond 100% of Wave 1's starting point (Point 0).
Rule 2: Wave 3 can never be the shortest among waves 1, 3, and 5.
Rule 3: Wave 4 can never enter the price territory of Wave 1 (no overlap).
Rule 4: Wave 5 must exceed the extreme of Wave 3 in an active impulse sequence.

Wave-4 Pullback Quality Grading: "Don't Trade into Bad Wave 4s"

Wave 4 is the phase where untrained traders surrender hard-earned profits by jumping in during choppy or overly deep pullbacks. AIMS eWaves Super actively grades every candidate pullback:

HIGH Grade: Retraces cleanly into the 38.2% – 50.0% Fibonacci Golden Pocket while maintaining trend structure.
CAUTION Grade: Retraces shallower than 38.2% or extends near 61.8%, signaling potential consolidation chop.
AVOID Filter: Deep pullbacks that break trend quality or exceed 61.8% are blocked and never signaled.

Real-time Elliott Wave count angles and continuation signals — Real-time continuation cues: 'W4 · consider Buy/Sell' and 'W5' ignition alerts delivered with surgical timing.

Interactive On-Chart Dashboard & Manual Anchor

AIMS eWaves Super features a sleek, non-intrusive on-chart HUD that summarizes market state at a glance:

Market Bias & Phase: Instantly displays whether the market is Watching, W3 Underway, W4 Zone, or W5 Complete.
Wave-4 Retrace %: Live Fibonacci percentage calculation updated with every incoming tick.
Active Setup Cue: Displays verified trade opportunities with suggested stop placements.
Interactive Draggable Manual Anchor: If you prefer to analyze from a custom macro pivot or historical economic release, toggle "Use Manual Anchor" and drag the vertical origin guide to any candlestick on the chart.

AIMS eWaves Super Script Access: Lifetime invite-only access to the official Pine Script indicator on TradingView.
Automated 0–5 Wave Engine: Objective momentum-based wave labeling across all timeframes and instruments.
Wave-4 Quality Grading Module: Real-time pullback depth analysis (38.2%–50% Golden Pocket, Caution, and Avoid filters).
Wave-5 Target Projections (TZ1 & TZ2): Automated Fibonacci extension zones where Wave 5 completes with high historical probability.
Live Count Narrative Dashboard: Compact on-chart HUD displaying Bias, Market Phase, Wave-4 Retrace %, and Active Setup status.
Interactive Manual Anchor Mode: Freedom to anchor the origin swing to any historical date/time with a draggable vertical guide.
Comprehensive Documentation & Video Tutorials: Complete step-by-step guides covering settings, validation rules, and trade setups.
Continuous Engine Updates: Free access to all future enhancements, Pine optimizations, and rule improvements.

Momentum-Based Wave Counting — Evaluates Awesome Oscillator (AO) histogram peaks rather than subjective chart swings
Automated 0–5 Wave Detection — Accurately identifies Point 0 origin, Wave 1, Wave 2, Wave 3 peak, Wave 4 retrace, and Wave 5 divergence
Enforced Elliott Wave Cardinal Rules — Strictly validates Wave 2, Wave 3 (never shortest), and Wave 4 overlap before printing labels
Wave 4 Quality Grading Engine — Classifies pullbacks into HIGH (38.2%–50% golden pocket), CAUTION, or AVOID to protect trading capital
Wave 5 Target Projections (TZ1 & TZ2) — Plots 62% and 100% Fibonacci expansion targets where Wave 5 terminates 8 out of 10 times
Real-Time Entry Cues & Invalidation Stops — "W4 / W5 · consider Buy/Sell" cues with aggressive (swing extreme) and conservative (61.8%) invalidation lines
Live Count Status Dashboard — Dynamic HUD narrating Watching → W3 Underway → W4 Zone → W5 Underway → Cycle Complete
Automatic Setup Retraction — Immediately marks broken setups as "✕ Setup Invalidated" if 61.8% or Wave 1 territory is breached
Challenger Dominance Margin Filter — Suppresses false flips during choppy consolidations by requiring challenger momentum to exceed the incumbent
Interactive Draggable Manual Anchor — Lets you override Point 0 and recalculate the entire count from your chosen swing
Full TradingView Native Alert Suite — Pre-configured alert triggers for Wave 4 zones, Wave 5 ignition, and setup invalidation
Universal Multi-Asset Compatibility — Excels on Crypto, Forex, Indices (NAS100, US30, SPX500), Commodities (Gold, Oil), and Equities

What is AIMS eWaves Super and how does it work?

AIMS eWaves Super is an institutional-grade Elliott Wave indicator designed exclusively for TradingView. Based on the bestselling iTradeAIMS book "How to Count Elliott Waves within 10 Seconds or Less", it removes the subjectivity of classical wave theory. Instead of guessing wave counts on ambiguous candle wicks ("ten Elliotticians give you twenty counts"), AIMS eWaves Super measures momentum peaks on the Awesome Oscillator (AO) histogram. It automates Point 0 identification, Wave 3 peak confirmation, Wave 4 zero-line retrace validation, and Wave 5 divergence projections in real time.

Why count momentum rather than price swings?

Price swings alone can be erratic, noisy, and prone to endless reinterpretation. Momentum, however, is pure physics. Wave 3 always represents the strongest institutional impulse and produces the tallest AO histogram peak. Wave 4 creates a zero-line cross or reset, and Wave 5 shows price printing new highs/lows while the AO displays clear divergence. By counting the histogram momentum rather than price bars, the count becomes 100% objective, repeatable, and robust.

How does the Wave-4 Pullback Quality Grade protect my capital?

Wave 4 is notoriously where retail traders bleed capital by jumping into premature pullbacks or catching falling knives. AIMS eWaves Super mathematically gates Wave 4: it requires a minimum 25% retrace of the Wave-3 leg, grades pullbacks in the 38.2%–50% Fibonacci "Golden Pocket" as HIGH, flags shallower/deeper moves as CAUTION, and classifies moves violating trend quality as AVOID. If price breaches the 61.8% invalidation line, the setup is automatically retracted.

What are TZ1 and TZ2 Target Zones?

Target Zone 1 (TZ1) and Target Zone 2 (TZ2) are Fibonacci expansion levels calculated from the Wave 1–3 impulse structure. Historically, Wave 5 completes inside or near these target zones approximately 8 out of 10 times. AIMS eWaves Super plots these levels dynamically on your chart as soon as a valid Wave-4 structure is confirmed, giving you precise, mathematically backed take-profit areas.

What happens if a setup gets invalidated?

Unlike ordinary repainting indicators that freeze stale or broken signals on your screen, AIMS eWaves Super features automated Setup Retraction. If a live setup is breached past the 61.8% invalidation line or violates Wave 1 territory, the cue visibly retracts to "✕ Setup Invalidated" and fires an alert. You never risk trading into a broken structure.

Can I manually anchor the wave count from an older swing?

Yes. In addition to the fully automated mode (which dynamically scans the last 100–150 bars), AIMS eWaves Super includes a Manual Anchor feature. Simply enable "Use Manual Anchor" and drag the vertical reference line onto any launch swing or major pivot. The entire 0–5 engine will recalculate from that exact origin, allowing deep historical analysis on any timeframe.

What trading platform is required for AIMS eWaves Super?

AIMS eWaves Super is built using advanced TradingView Pine Script v5/v6 and runs directly inside the TradingView platform on web, desktop, and mobile apps. It works on both free and paid TradingView subscription tiers.

How do I receive access after purchasing?

AIMS eWaves Super is an invite-only TradingView indicator. Upon completing your one-time purchase of $497, simply provide your TradingView username. Our team will grant your account lifetime access within 12 hours, and the script will appear under your "Invite-Only Scripts" tab in TradingView ready to add to any chart with one click.